Features of the Concrete Effect Plaster with Glossy Varnish

• High mechanical resistance.
• Easy, fast, and dust-free application - manageable as a DIY at home.
• Possibility of imitating concrete, stucco, and other materials.
• Resistant to temperature and abrasion.
• Application on any substrate (old plaster, drywall, concrete, etc.).
• Luxurious look of exposed concrete and color stability.
• We supply the concrete effect plaster 20 kg including primer 2,5 kg, final varnish 1,5 kg - classic varnish and 0,5 kg glossy varnish.
• The concrete effect plaster is also suitable for bathrooms and shower corners using

Consumption of Concrete Effect Plaster

The average consumption is approx. 1 kg per m² for one layer. Consumption depends on the prepared substrate and the thickness of the applied concrete effect plaster (one layer approx. 1 mm).

From a single 20 kg bucket, you can prepare approximately 10 m² in two layers. The measured values are provided under standard conditions — for uneven surfaces, it is recommended to order more material.

How to Prepare and Apply Concrete Effect Plaster

Although concrete plaster finish is primarily a design and functional element suitable for almost any interior, its application is really easy and can be managed by anyone — all you need is a Venetian trowel and a paintbrush.

Surface Preparation and Primer Application

The concrete effect plaster can be applied to any absorbent surface (old plaster, drywall, stucco, lost formwork, old concrete, etc.). Concrete effect plaster should not be applied on frozen, wet, highly sunlit surfaces, or in fog or rain. The surrounding temperature should be between 5–20°C.

Clean the prepared surface from grease and dirt. Fill larger cracks or irregularities with mortar or adhesive. Minor irregularities will be covered during the application of the concrete trowel finish. Included in the package is a primer for the concrete effect plaster, enhancing the adhesion of the concrete effect plaster and increasing its mechanical resistance.

Mix the primer and apply it to the prepared and cleaned surface with a paintbrush and let it dry for about 2 hours.

Mixing Concrete Effect Plaster

Concrete effect plaster must be thoroughly mixed before application, either manually or with a low-speed mixer (~400 rpm) to achieve a uniform consistency. If the plaster substance is thick, it can be diluted with a little water - 1-2 dcl of water.

Applying the First, Base Layer

Two layers of concrete effect plaster should be applied to the finished and prepared surface.

Apply the first layer with a maximum thickness of 1–2 mm using a Venetian trowel. The concrete effect plaster should be all over the wall covering the whole area of the wall. The first layer should dry for about 3–6 hours.

Application of the Second Textured Layer

Apply the second layer again using a Venetian trowel. The second layer should be done with short, irregular movements - circular, vertical, or horizontal. In this step, there are no limits to imagination, and it always depends on preferences for how you want the trowel finish to look.

To achieve a shading/marbling effect, it is necessary to vigorously rub selected areas while holding the trowel flat with minimal inclination to the surface. If the trowel finish surface is wet and pliable during application, you will achieve a uniform and smooth surface.

If you are working with a fresh surface, you can achieve various effects, for example, by imprinting screws, wooden boards, and similar techniques.

The second layer should dry for approximately 6–12 hours.

Application of the Final Glossy Varnish

The final lacquer increases the longevity and durability of the concrete trowel finish. Mix the dense lacquer and apply it using a paintbrush. Lacquer consumption is approximately 0.1 kg per 1 m² of concrete plaster finish — in a typical environment, apply 1 to 2 layers of this varnish.

If you are interested in enhancing the shine of the concrete plaster, mix the standard varnish with glossy varnish and apply 2 coatings of varnish.

Application of Lacquer in Bathrooms and Shower Corners

In the case of using concrete plaster finish in areas with increased humidity or water contact, we recommend applying a to ensure enhanced protection against water. This water-resistant varnish is suitable for bathrooms or shower corners. You should apply this water-resistant lacquer as the 3rd layer of varnish (under this varnish, always apply 2 layers of standard varnish).

For more information, you can refer to our article

The varnish consumption is approximately 0.1 kg per 1 m² of concrete plaster finish — in a typical environment, apply 1 to 2 layers of this lacquer, and for shower corners, apply the 3rd layer of the

We supply the concrete plaster finish including primer (2.5 kg), final clear varnish (1,5 kg) and glossy varnish (0,5 kg).

Technical Specification of Hermann Concrete Effect Plater